Chs2U-Gw-Xx / Chs2U B-Xx / Chs2U E (9.5 Inch Ksu) - NEC Univerge SV8100 System Configuration Manual

Full-featured ip based communications system

Hide thumbs Also See for Univerge SV8100:

Table of Contents

8. CHS2U-GW-xx / CHS2U

The CHS2U-GW-xx /

slots for legacy line / trunk board (Single Line Telephone Interface, Digital Multi-line Terminal

Interface, Central Office Trunk, ISDN PRI Interface, etc.), In-skin Application boards (In-skin UMS,

In-Skin Router, etc.). It also houses Power Supply Unit (PSU).

CHS2U-GW-xx / CHS2U-B-xx can be mounted on the wall or a stand mount.

Fig 8-A CHS2U-GW-xx / CHS2U B-xx (Front / Rear View)

In the CHS2U GW-xx and CHS2U B-xx the CD-CP00-xx must be installed in the first slot (slot 1).

When the CD-CP00-xx blade is installed in slot 1 of the 9.5" Base Chassis, it is called the

controlling chassis. Additional chassis, (9.5" Expansion Chassis) can be installed to increase the

capacity of the system to meet the customer's business needs.

After combine CHS2U B-xx and CHS2U E, it can be mounted on the wall or Rack mounted.

CD-CP00-xx

Fig 8-B 9.5" Base and Expansion Chassis CPU Location

B-xx / CHS2U E

CHS2U-B-xx,

9.5 inch Chassis has three (Slot 1 for CPU) universal board

前面と背面の絵

Base Chassis

CHS2U B-xx

(9.5 inch KSU)

Expansion Chassis

CHS2U E

Table of Contents