Wwan Module - HP Elite x360 1040 G9 Maintenance And Service Manual

Do not touch the connectors with any metallic surface or object, such as metal tools, screws, or coins,
●
which can cause shorting across the connectors.
Before removing the battery, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
WARNING!
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT:
To prevent loss of information, save your work or shut down the computer through Windows before you
remove the battery.
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Remove the four Phillips M2.0 × 4.5 screws (2) that secure the battery to the computer.
3. Swing the rear edge of the battery (3) up and forward until it rests at an angle.
4. Remove the battery (4) by sliding it up and back at an angle.
To insert the battery, reverse the removal procedures.

WWAN module

To remove the WWAN module, use this procedure and illustration.
Table 5-3 WWAN module descriptions and part numbers
Description
Intel 5000 5G WWAN module
Intel XMM 7560 R+ LTE-Advanced Pro (Cat 16) WWAN module
44 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
To reduce potential safety issues, use only the user-replaceable battery provided with the
Removing a battery that is the sole power source for the computer can cause loss of information.
Preparation for disassembly on page
41).
41).
Spare part number
M46335-001
M52040-001