Heat Sink - HP Elite x360 1040 G9 Maintenance And Service Manual

11. Remove the system board.
Reverse this procedure to install the system board.

Heat sink

To remove the heat sink, use these procedures and illustrations.
Table 5-12 Heat sink descriptions and part numbers
Description
Heat sink (includes captive screws and replacement thermal material)
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the fan (see
5. Remove the system board (see
Remove the heat sink:
1. In the order indicated on the heat sink, loosen the four Phillips captive screws (1) that secure the heat sink
to the system board.
Preparation for disassembly on page
Bottom cover on page
Battery on page 43).
Fan on page 53).
System board on page
41).
57).
Spare part number
N07350-001
41).
Heat sink 61