HP Elite x360 1040 G9 Maintenance And Service Manual page 55

Table 5-6 Solid-state drive descriptions and part numbers (continued)
Description
256 GB, M.2 2280, PCIe-4×4, SED solid-state drive with TLC
256 GB, M.2 2280, PCIe, NVMe, value solid-state drive
Solid-state drive shield: Included in the Bracket Kit, spare part number N09285-001.
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1. Remove the solid-state drive shield.
The solid-state drive shield is included in the Bracket Kit, spare part number N09285-001.
2. Thoroughly clean the thermal material from the surfaces of the solid-state drive and the solid-state drive
shield each time the solid-state drive shield is removed. Replacement thermal material is included with the
solid-state drive shield spare part kit. The following illustration shows the replacement thermal material
locations.
A thermal pad is used on the solid-state drive (1) and on the solid-state drive shield area (2) that services it.
The solid-state drive thermal pad is available using spare part number N02333-001.
Preparation for disassembly on page
Bottom cover on page 41).
41).
Battery on page 43).
Spare part number
M52029-001
L85354-001
Solid-state drive 49