Interface Characteristics; Interface Assignment - Siemens SIMOTION Equipment Manual

Interfaces
4.6 Digital I/Os / temperature sensor / analog input
4.6.2

Interface characteristics

Table 4-16
Features
Connector type (X120, X121)
Connector type (X130, X131)
Number of connectable conductors
Connectable cable types and conductor cross-sec‐
tions
Stripped length
Tool
Max. cable length
Note
To prevent an incorrect connection, the X120, X121, X130 and X131 connectors are supplied
coded. The terminal and pin numbers are also inscribed on the connectors.
4.6.3

Interface assignment

The following tables contain the pin assignments of the onboard I/Os.
58
Interface characteristics
Rigid
Flexible
Flexible, with wire-end ferrule without plas‐
tic sleeve
Flexible, with wire-end ferrule with plastic
sleeve
AWG / kcmil
Type
12-pin spring-loaded terminal
8-pin spring-loaded terminal
1
0.2 mm² ... 1.5 mm²
0.2 mm² ... 1.5 mm²
0.25 mm² ... 1.5 mm²
0.25 mm² ... 0.75 mm²
24 ... 16
10 mm
Screwdriver 0.4 x 2.0 mm
30 m
Equipment Manual, 07/2021, A5E33446720B
SIMOTION D410-2