Tm54F Terminal Module - Siemens SIMOTION Equipment Manual

Spare parts / accessories

7.4 TM54F terminal module

Type
Analog inputs
TTL encoder output
NOTICE
Overheating if ventilation clearances are too small
Insufficient ventilation clearances result in overheating and therefore in more failures and a
shortened life of the component.
Maintain 50 mm ventilation clearances above and below the component.
Additional references
For further information on the TM41 Terminal Module, see the SIMOTION D410-2
Commissioning and Hardware Installation Manual.
7.4 TM54F terminal module
Characteristics
The TM54F Terminal Module is a terminal expansion module for snapping on to a DIN EN 60715
mounting rail. The TM54F offers safe digital inputs and outputs for control of Safety Integrated
functions of SINAMICS.
A SIMOTION D410‑2 can be assigned exactly one TM54F which is connected via DRIVE-CLiQ.
The TM54F Terminal Module is an alternative to using Safety Integrated functions via the
onboard terminals (F‑DI, F‑DO) or via PROFIsafe.
Interfaces
Table 7-4
Type
Fail-safe digital outputs (F‑DO)
Fail-safe digital inputs (F‑DI)
Sensor power supplies, can be made dynamic
102
The following terminals are located on the TM54F:
1)
2)
Quantity
1
1
3), 4)
Equipment Manual, 07/2021, A5E33446720B
Quantity
4
10
2
SIMOTION D410-2