Interfaces; Overview Of Interfaces - Siemens SIMOTION Equipment Manual
Hide thumbs
Also See for SIMOTION:
- Function manual (186 pages) ,
- Operating instructions manual (184 pages) ,
- Planning manual (66 pages)
Table of Contents
Advertisement
Interfaces
4.1
Overview of interfaces
This section describes the interfaces of the SIMOTION D410‑2. Information on the arrangement
of the interfaces on the module can be found in Sections SIMOTION D410-2 DP representation
(Page 29) and SIMOTION D410-2 DP/PN drawing (Page 31).
Available interfaces
Table 4-1
Interface
X100
X21
X24
X150 P1, P2
X23
X120
X121
X130
X131
X124
X127 P1
T0, T1, T2 and G
PM-IF
Non-usable interfaces
Table 4-2
Interface
Interface for BOP
SIMOTION D410-2
Equipment Manual, 07/2021, A5E33446720B
Overview of available SIMOTION D410-2 interfaces
Type
DRIVE-CLiQ interface (DQ)
PROFIBUS DP/MPI interface
PROFIBUS DP interface
(SIMOTION D410‑2 DP only)
PROFINET IO interface
(SIMOTION D410‑2 DP/PN only)
Encoder interface (ENC)
Temperature sensor connection, fail-
safe digital inputs
Isolated digital inputs, fast digital I/Os
Isolated digital input, fail-safe digital
output
Fast digital I/Os, analog input
Power supply connection
Ethernet interface (PN/IE)
Measuring sockets
Power module interface
Overview of non-usable SIMOTION D410-2 interfaces
Designation
BOP
Connector type
8-pin RJ45plus socket to connect DRIVE-
CLiQ nodes
9-pin SUB-D socket to connect to PROFI‐
BUS DP or MPI
9-pin SUB-D socket to connect to PROFI‐
BUS DP
8-pin RJ45 socket to connect to PROFINET
IO
15-pin SUB-D socket for connecting HTL,
TTL and SSI encoders
12-pin spring-loaded terminal
12-pin spring-loaded terminal
8-pin spring-loaded terminal
8-pin spring-loaded terminal
4-pin screw-type terminal connection
8-pin RJ45 socket for Ethernet connection
(LAN)
Sockets to output analog signals
8-pin direct connector to connect to a
blocksize power module
Connector type
8-pin multipoint connector
4
47
Advertisement
Table of Contents
