Table of Contents
Advertisement
Mandatory Regulations
2.9.4 Radio Compliance
The equipment complies with the applicable requirements in ETSI EN 301 908-2 and
EN 301 908-13.
The equipment complies with the applicable WLAN requirements in ETSI EN 300
328 (2.4GHz) and EN 301 893 (5GHz). In the frequency band 5 150-5 350 MHz, the
band is restricted to indoor use with a maximum mean EIRP of 200 mW (23dB).
2.9.5 RF Exposure
The 7705 SAR-Hm and 7705 SAR-Hmc comply with the EN62311 RF Exposure
limits when operating with the allowed maximum gain antennas defined by Nokia. At
least 7.9 in. (20 cm) separation distance between the operator or bystander and the
7705 SAR-Hm or 7705 SAR-Hmc antenna must be maintained at all times.
The EIRP levels are maintained when operating with the antennas provided by
Nokia.
2.9.6 Protective Earth
Protective earth is referred to as chassis ground in this document. A green and
yellow colored earth wire must be connected from the site equivalent of the mains
earth connection to all shelves in accordance with IET Wiring Regulations (use the
most recent edition available). This connection is made via the chassis ground
connection (see
protective earth).
2.9.7 Eco-Environmental
Packaging Collection and Recovery Requirements
Countries, states, localities, or other jurisdictions may require that systems be
established for the return and/or collection of packaging waste from the consumer,
or other end user, or from the waste stream. Additionally, reuse, recovery, and/or
recycling targets for the return and/or collection of the packaging waste may be
established.
46
Grounding the Chassis
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
SAR-Hm and SAR-Hmc Chassis Installation Guide
for specific instructions on connecting the
3HE 17810 AAAA TQZZA
Hide quick links:
Advertisement
Table of Contents
