General Requirements; Anti-Static Measures - Nokia 7705 SAR-Hm Installation Manual

Mandatory Regulations

2.4 General Requirements

The sections that follow outline the mandatory regulations that govern the installation
and operation of the 7705 SAR-Hm and 7705 SAR-Hmc. The information in this
section also describes instructions and information related to overall conformance
with the mandatory regulations. You must adhere to these instructions so that your
system meets regulatory requirements.
Danger: Before working on equipment that is connected to power, remove jewelry, such as
rings, necklaces, and watches. When metal objects are in contact with power and ground,
serious burns can occur or the objects can become welded to the terminals.
Warning: The compliance and long-term reliability of the 7705 SAR-Hm and
7705 SAR-Hmc are wholly dependent on using the product within the environmental limits
and restrictions described in the

2.4.1 Anti-static Measures

Figure 1
to the presence of ESD-sensitive devices in the product. The necessary ESD
precautions must be taken whenever this symbol is present on the product.
Figure 1
This guide uses the following icon and associated text to provide special information
relating to ESD-sensitive activities or situations.
30
Site Preparation
shows the ESD awareness label used on Nokia products to alert personnel
ESD Awareness Label
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
SAR-Hm and SAR-Hmc Chassis Installation Guide
chapter.
17658
3HE 17810 AAAA TQZZA