Emc Compliance; Rf Exposure - Nokia 7705 SAR-Hm Installation Manual

Hide thumbs Also See for 7705 SAR-Hm:
Table of Contents

Advertisement

SAR-Hm and SAR-Hmc Chassis Installation Guide
Note:

2.7.3 EMC Compliance

EMC compliance requires the use of shielded cables or other special accessories.
These special accessories must be installed as per the instructions. See section
EMC Compliance

2.7.4 RF Exposure

The 7705 SAR-Hm and 7705 SAR-Hmc comply with the RSS-102 RF Exposure
limits when operating with the allowed maximum gain antennas defined by Nokia. At
least 7.9 in. (20 cm) separation distance between the operator or bystander and the
7705 SAR-Hm or 7705 SAR-Hmc antenna must be maintained at all times.
3HE 17810 AAAA TQZZA
1. The EIRP limit in Band 30 for mobile stations must not have an antenna gain exceeding 1 dBi in
Band 30. Additionally, the IC prohibits the use of external vehicle-mounted antennas for mobile
stations in this band. Fixed subscriber stations in Canada may have an antenna gain of up to
10 dBi in Band 30; however, the use of outdoor antennas or outdoor station installations are
prohibited, except if installed professionally in locations that are at least 20 meters from roadways
or in locations where it can be shown that the ground power level of -44 dBm per 5 MHz in the
bands 2305–2315 MHz and 2350–2360 MHz or -55 dBm per 5 MHz in the bands 2315–2320 MHz
and 2345–2350 MHz will not be exceeded at the nearest roadway.
for additional information.
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
Mandatory Regulations
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7705 sar-hmc

Table of Contents