Nokia WiFi Gateway 3 Product Guide
2.2 Safety standards compliance
2.2.1
Issue: 01
Figure 1
Sample safety label
This section describes the CPE compliance with North American safety standards.
Warning —
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
EMC, EMI, and ESD standards compliance
The customer premises equipment complies with the following requirements:
•
Federal Communications Commission (FCC) CFR 47, Part 15, Subpart B, Class
A requirements for equipment
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
3FE-47464-AAAA-TCZZA
Changes or modifications to this unit not expressly
ANSI CPE safety guidelines
19