SAR-Hm and SAR-Hmc Chassis Installation Guide
2.4.2 Unit Repair
Return a damaged unit to an authorized Nokia repair center for service or repair.
2.4.3 Equipment Interconnection Points
Warning: Only connect like circuits: SELV to SELV or TNV-2 to TNV-2, as defined in IEC
60950-1, and ES1 to ES1 or ES2 to ES2, as defined in IEC 62368-1.
2.4.3.1
The following interconnection points on all 7705 SAR-Hm and 7705 SAR-Hmc
chassis are SELV or ES1 connections:
2.4.3.2
The following interconnection points on all HV-PS35 external power are Primary or
ES3 connections:
2.4.4 Prevention of Access
The 7705 SAR-Hm and 7705 SAR-Hmc must be accessible only to authorized,
trained service personnel. Install this apparatus in a restricted access location or
similar environment to prevent unauthorized access.
3HE 17810 AAAA TQZZA
SELV and ES1
• Ethernet (10/100Base-T) ports
• Alarm port
• Console port
• RS-232 ports
• DC power input terminal block
Primary and ES3
• AC
• HV DC (high voltage DC; from 88 VDC up to 300 VDC)
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
Mandatory Regulations
33