Blomberg TSM 1541 User Manual page 12

12. Re-fit the top plate (14) and put the
two screws into the top front plastic
trim (15)
13. Put the two screws back into the top
plate (16)
14. Put the pin on the upper wall (17).
Take the 4-star compartment
cover(18). Put the hinge (19) and the
locking mechanism in place (20). Put
the caps in to the holes (21&22)
15. To refit the door, locate the top hinge
in the door, attach to the cabinet and
hold the door (23).
16. Fit the bottom hinge (24). If necessary
adjust and then tighten the bolts.
Ensure, that the door opens and
closes easily and that there are no
gaps allowing air into the cabinet. If
there are gaps between the door seal
and the cabinet, adjust the door seal
by gently pulling away from the door
using fingers.
17. Fit the other front feet (25).
18. Carefully stand your appliance.
(You may need somebody to help
you.) Adjust the front feet (See
Installation Instructions)
19. Put back all, loose items and
fittings.
20. Wait for at least 4 hours to allow
the system to settle before
switching on.Spare plastic parts
supplied with the appliance are
for your future use during door
repositioning.
21. Fit the door handle to the opposite
side of the door and tighten the
bolts. (26).
12
EN