Programming Password Setup - NEC SL2100 Programming Manual

SL2100
Level:
IN
Description
Use Program 90-02 : Programming Password Setup to set the system passwords. For password
Program
entry, the system allows eight users to be defined. Each user can have a:
• Unique alphanumeric name (up to 10 alphanumeric characters)
90
• Password entry of up to eight digits (using 0 ~ 9, # and
• Password level
The IN level password is used by the System Installer for system programming. The SA or SB level
password cannot access the IN level programs. The reverse type (white on black) just beneath the
Description heading is the program access level. You can only use the program if your access level
meets or exceeds the level the program requires. (SA level password can access to SA or SB
programs, and SB level password can access to SB programs only.)
NEC Strongly recommended that the User Name and Password should change
regularly to prevent your personal information from being stolen and misused.
Before changing your numbering plan, use the PC Programming or WebPro
Programming to make a backup copy of your system data.
Input Data
Item
No.
01 User Name
02 Password
03 User Level
Default
User No.
2
3
4
2-572
Program 90 : Maintenance Program

90-02 : Programming Password Setup

User Number
Item
Maximum 10 characters
Up to eight digits
0 = Prohibited User
2 = IN (Installer Level)
3 = SA (System Administrator A)
4 = SB (System Administrator B)
5 = UA (User Administator)
User Name Password
tech 12345678
ADMIN1 0000
ADMIN2 9999
)
*
2 ~ 8
Input Data
Level Level Description
2 (IN) Installer Level - Access to all IN level pro-
grams.
3 (SA) System Administrator Level 1 - Restricted
Access
4 (SB) System Administrator Level 2 - More Re-
stricted Access
Program 90 : Maintenance Program
ISSUE 2.0
Default
Refer below
Refer below
Refer below