Service Code Setup (For Service Access) - NEC SL2100 Programming Manual

SL2100
Level:
IN
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes
Program
which are used for service access. You can customize additional Service Codes in Programs 11-10,
11-11, and 11-14 through 11-16.
11
The following chart shows:
• The number of each code (01 ~ 64).
• The function of the Service Code.
• The type of telephones that can use the Service Code.
• The default entry. For example, dialing (Item 05) cancels a previously set Camp- On.
• Programs that may be affected with the changing the code.
Input Data
Item
No.
01 Call Forward/Do
Not Disturb
Override
02 Conference
03 Call waiting (off-
hook signaling)
04 Camp on/Call
waiting call back
05 Cancel Camp-On 0~9,
06 Switching of
Voice Call and
Signal Call
07 Step Call
08 Barge-In
09 Change to STG
(Department
Group) All Ring
10 Speed Dial Com-
mon/Station
2-82
Program 11 : System Numbering

11-12 : Service Code Setup (for Service Access)

Item Input Data
0~9, * , # Maximum of
8 digit
0~9, * , # Maximum of
8 digit
0~9, , # Maximum of
*
8 digit
0~9, , # Maximum of
*
8 digit
* , # Maximum of
8 digit
0~9, , # Maximum of
*
8 digit
0~9, , # Maximum of
*
8 digit
0~9, , # Maximum of
*
8 digit
0~9, , # Maximum of
*
8 digit
0~9, , # Maximum of
*
8 digit
Description
Terminal: MLT, SLT
Activating Call Forwarding/Do Not
Disturb Override. This code is avail-
able only if you disable the voice
mail Single Digit dialing code in Pro-
gram 11-16-09.
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
Terminal: MLT, SLT
Assign the service code used for ac-
cessing common speed dialing (sys-
tem speed dialing) bins.
The service code assigned must be
within your valid numbering plan in
PRG.
Program 11 : System Numbering
ISSUE 2.0
Default Related
Program
707
#1
709
750
770
712
708
710
No Setting 16-02
#2