Lcd Line Key Name Assignment - NEC SL2100 Programming Manual

ISSUE 2.0
Program 15 : Extension, Basic Setup
Level:
IN
Description
Use this Memory Block to assign a name to each LCD Line Key of the IP Multiline Terminal. Up to 13
characters can be assigned.
Input Data
Extension Number
Key Number
Item No.
01 Name
Name (Chinese Character)
Default
Key No.
LK01
:
LK06
LK07
LK08
LK09
:
LK32
Depend on PRG15-07-01
When Chinese characters is inputted, if character is not inputted, it is an error. It is not an error when only
character is inputted.
Conditions
None
Feature Cross Reference
None
Programming Manual

15-20 : LCD Line Key Name Assignment

Item
Up to 13 characters
The Chinese character of a maximum of 6
characters
Name
CO 001
:
:
:
CO 008
All Blank
:
All Blank
Up to eight digits
1 ~ 32
Input Data
Name (Chinese Character)
All Blank
:
:
:
:
:
:
All Blank
SL2100
Program
15
Default
Refer below
2-169