GE Kelman DGA 900 Plus Installation & Commissioning Manual page 84

Figure 10-15: OltcGroups.cfg
7. Click the Generate Group Reference File button to create the 'OltcRefData.cfg'
file.
In the dialog box, browse to the folder location for the configuration file and click
OK.
A message box confirms with the message 'File creation complete' when the
configuration file is successfully created in the specified location. Click OK.
Browse to the folder location of the 'OltcRefData.cfg' file.
Use a text editor, such as Notepad, to open the 'OltcRefData.cfg' file and verify that
the file looks similar to the example as shown in Figure 10-16 i.e. that the file is not
blank or corrupt.
Figure 10-16: OltcRefData.cfg
8. Browse to the folder location for the three valid configuration files as shown in
Figure 10-17 to verify that they exist.
MA-041 – DGA 900 Plus - Installation & Commissioning Manual - Rev 1.1 4-Mar-22 Page 84 of 99