GE Kelman DGA 900 Plus Installation & Commissioning Manual page 57

Figure 9-30: Limits scan range
The progress of the scan is displayed on the status bar (bottom left of the AntScope
window). Wait until the scan is finished as shown in Figure 9-31.
Figure 9-31: AntScope measurement - Open
To save the calibration, select Configure > Save last measured data > as "open"
Calibration as shown in Figure 9-32.
MA-041 – DGA 900 Plus - Installation & Commissioning Manual - Rev 1.1 4-Mar-22 Page 57 of 99