Cable Hole - Huawei SmartAX MA5600T Hardware Description

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
Figure 1-33 Configuration of the N66E-18 cabinet installed with two MA5603T chassis
NOTE

1.2.5 Cable Hole

The power cables and subscriber cables are led into the N66E-18 dual-standard cabinet from the
top and the bottom of the cabinet. This topic describes the positions of cable holes at the top and
the bottom of the N66E-18 dual-standard cabinet.
Issue 08 (2013-12-18)
l In Figure 1-33, the filled holes are for floating nuts to fasten chassis.
l When all the service slots in the chassis are installed with the VDSL, combo, or PON boards, one
chassis is allowed in the cabinet.
l In the range of 90 V AC to 175 V AC, the output current of the EPS75-4815AF power system decreases
linearly, limited within a specified range. In areas with 110 V power supply, dual-live-wire input is
recommended. When 110 V single-live-wire input is used, the output power of the EPS75-4815AF
power system reduces to half (maximum: 1600 W) of that in 220 V. In this case, only one chassis is
allowed in the cabinet.
l Cabinet installation against the wall or back-to-back cabinet installation is not supported.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Cabinet
44