SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
NOTE
Configuration of Two ETSI Subracks
Figure 1-4
Issue 08 (2013-12-18)
l In
Figure
1-4, the filled holes are for floating nuts to fasten subracks.
l For the I-type or C3-type PDU, use installation holes 79 and 82; for the B-type PDU, use installation
holes 79 and 81.
l The cabinet can also support an additional service subrack. In this case, it is recommended that the air
deflector (if not configured) be configured.
shows the configuration of the N63E-22 cabinet installed with two ETSI subracks.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Cabinet
8