Huawei SmartAX MA5600T Hardware Description page 52

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
NOTE
DC-powered Cabinet with One ETSI Subrack and One SPL Subrack (MA5600T)
Figure 1-28
and one SPL subrack.
Figure 1-28 Configuration of the N66E-18 cabinet installed with one ETSI subrack and one
SPL subrack
Issue 08 (2013-12-18)
l In Figure 1-27, the filled holes are for floating nuts to fasten subracks.
l The I-type PDU is used for the DC power supply.
l Cabinet installation against the wall or back-to-back cabinet installation is not supported.
l When high-density boards are configured, cables in some areas are close to the air exhaust vents of the
ETSI subrack. In this case, to ensure smooth ventilation, no cabling is allowed at least 1 U space around
the air exhaust vents.
shows the configuration of the N66E-18 cabinet installed with one ETSI subrack
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Cabinet
38