Nokia EM7500 Installation Manual page 48

3
Performing the Initial Configuration
To access the command-line interface
1. Log on to the appliance by using a command-line connection (SSH,
console, or Telnet) over a TCP/IP network as an admin, cadmin, or
monitor user:
2. If you log in as a monitor user, you can execute only the show form of
commands. That is, you can view configuration settings, but you cannot
change them.
You can now execute CLI commands from the CLI shell and the Nokia IPSO
shell. The Nokia IPSO shell is what you see when you initially log on to the
appliance.
Execute from
Nokia IPSO
command line
Nokia IPSO
command line
Command files
48
All manuals and user guides at all-guides.com
If you log in as a cadmin (cluster administrator) user, you can change
and view configuration settings on all the cluster nodes. For
information about how to administer a cluster, see the traffic
management commands section in the CLI Reference Guide for the
version of Nokia IPSO you are using.
To Implement
Enter the following command
to invoke the CLI shell:
clish
The prompt changes, and you
can then enter CLI commands.
Enter
clish -c
"cli-command"
From inside the CLI shell, enter
load commands
filename
Purpose
Enter any CLI commands in an
interactive mode with help text
and other helpful CLI features.
Execute a single CLI
command. You must place
double-quotation marks
around the CLI command.
Load commands from a text
file that contains commands.
The argument must be the
name of a regular file.
IP390, 105i & 105s Security Platform Installation Guide