Auxiliary Port; Table 7 Pin Assignments For Aux Connector And Modem Cable - Nokia EM7500 Installation Manual

All manuals and user guides at all-guides.com
Console Port
(DTE)
GND
RxD
DSR
CTS
The console cable provided with the IP390 is comprised of two parts:
6-foot rollover cable with RJ-45 terminations
RJ-45 to DB-9 adapter
On the opposite end of the console cable, connect the RJ-45 to the DB-9
adapter, which you can then connect to the host terminal.

Auxiliary Port

Use the built-in serial (AUX) port, shown in
connection for managing the appliance remotely or out-of-band. The default
configuration of the serial ports are: 9600 baud, 8 bits, no parity, and 1 stop.
bit. Table 7

Table 7 Pin Assignments for AUX Connector and Modem Cable

Auxiliary Port
(DTE)
Signal
RTS
DTR
IP390, 105i & 105s Security Platform Installation Guide
RJ-45 to RJ-45 Rollover
Cable
5 4
6 3
7 2
8 1
provides pin assignment information for modem connections.
RJ-45 to RJ-45 Rollover
Cable
RJ-45 Pin RJ-45 Pin
1 8
2 7
Connecting to the Console or Auxiliary Port
RJ-45 to DB-9
Terminal
Adapter Console Device
5 GND
3 TxD
4 DTR
7 RTS
Figure 1, to establish a modem
RJ-45 to DB-25
Modem Adapter Modem
DB-25 Pin Signal
4 RTS
20 DTR
37