Toro TX 1300 Operator's Manual page 30

Types of DPF regeneration that require you to park the machine: (cont'd.)
Type of Regeneration
Recovery
DPF Regeneration Menu
Accessing the DPF Regeneration Menu
1. Access the Service menu and scroll down to
DPF R
EGENERATION
2. Press the right button to access the DPF
Regeneration menu.
Time Since Last Regeneration
Access the DPF Regeneration menu and scroll down
to the L R field.
AST EGEN
Use the L R field to determine how many
AST EGEN
hours you have run the engine since the last reset,
parked, or recovery regeneration.
Conditions that cause DPF regeneration
Occurs because the operator ignored requests for
a parked regeneration and continued operating the
machine, adding more soot to the DPF
.
Figure 24
Figure 25
DPF description of operation
•
When the reset-standby/parked or recovery
regeneration icon
displays in the InfoCenter, a recovery
regeneration is requested.
•
A recovery regeneration requires up to 3 hours
to complete.
•
You must have at least a 1/2 tank of fuel in the
machine.
•
You must park the machine to perform a
recovery regeneration.
Refer to
Regeneration (page
Technician Menu
Important:
For operating convenience, you
may decide to perform a parked regeneration
before the soot load reaches 100%, provided
the engine has run more than 50 hours since
the last successful reset, parked, or recovery
regeneration.
Use the technician menu to view the current state of
engine regeneration control and view the reported
soot level.
Access the DPF Regeneration menu, then scroll down
g362603
and access the T
•
Use the DPF Operation Table to understand the
current state of DPF operation.
g362604
30
or
ADVISORY
Performing a Parked or Recovery
33).
menu.
ECHNICIAN
Figure 26
Figure 27
#190
g362719
g362718