Specifications; Attachments/Accessories - Toro TX 1300 Operator's Manual

2. In the S
ETTINGS
P M
ROTECTED ENU
Figure 17
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit.
Repeat this step until the last digit is entered and
press the right button once more.
Figure 18
4. Press the middle button to confirm the PIN code.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
You can view and change the settings in the
P M . Once you access the P
ROTECTED ENU
M , scroll down to P
ENU
Use the right button to change the setting. Setting
the Protect Settings to O
change the settings in the P
entering the PIN code. Setting the Protect Settings
to O hides the protected options and requires you
N
to enter the PIN code to change the setting in the
P M .
ROTECTED ENU
M , scroll down to the
ENU
and press the right button.
ROTECTED
S option.
ROTECT ETTINGS
allows you to view and
FF
M
ROTECTED ENU

Specifications

Note:
Specifications and design are subject to
change without notice.
Width
Length
Height
Weight
Operating capacity (35% of tipping
capacity 1 )
g364601
•
Arms retracted
•
Arms extended
Tipping capacity
•
Arms retracted
•
Arms extended
Wheelbase
Dump height (with standard bucket)
•
Arms retracted
•
Arms extended
Reach—fully raised (with standard
bucket)
•
Arms retracted
•
Arms extended
Height to hinge pin (with standard
bucket in highest position)
•
Arms retracted
•
Arms extended
1. The operating capacity is calculated as 35% of the tipping capacity with
a standard bucket and 75 kg (165 lb) operator, per ISO 14397-1. Other
attachments will have different operating capacities; refer to the Operator's
Manual or load capacity decal for the attachment.

Attachments/Accessories

g364599
A selection of Toro-manufactured attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
Toro-manufactured attachments and accessories.
To ensure optimum performance, use genuine Toro
replacement parts and accessories. Toro accepts
no liability for machine damage or personal injury
that results from the use of other manufacturer
attachments. The user accepts the burden of these
risks.
without
18
116.8 cm (46.0 inches)
215.6 cm (84.9 inches)
143.5 cm (56.5 inches)
1
99.1 cm (39.0 inches)
180.1 cm (70.9 inches)
230.3 cm (90.7 inches)
33.5 cm (13.2 inches)
67.8 cm (26.7 inches)
227.1 cm (89.4 inches)
1750 kg (3858 lb)
589.7 kg (1300 lb)
280 kg (618 lb)
1685 kg (3714 lb)
792 kg (1746 lb)
277.3 cm (109.2
inches)