Table of Contents
Advertisement
3
3-28 Performing Setup from the Control Panel
Network Setup
Service Setup
PServer Setup
Bindery Setup
.
Add File Server
This option gives you two ways to add a Novell NetWare file server.
Select File Server
From List/Search by Name [From List]
You may select the file server from a scrollable list, or by a name search.
Choose From List if your network doesn't have a large number of file servers.
Select Search by Name if the number of file servers is so large that scrolling through
the list would take a long time.
If you selected
:
From List
Add Server
List of all servers
The ColorPASS obtains a list of NetWare
file servers by querying the IPX network.
Use the up and down buttons to select a
NetWare file server from the list. Choose
the server on which you have configured
a print server and print queue to handle
ColorPASS print jobs.
Once you have chosen a file server, the ColorPASS immediately tries to log in as a
guest without a password. If it succeeds, it skips to the NetWare Print Server option.
If you try to add a file server but all ColorPASS connections are already being used,
you are prompted to remove a file server (see "Remove File Server" on page 3-31).
If you selected
Search by Name
Enter First Letters of Server Name
Use the up and down buttons to enter the
first letters of the name of the file server
you want to use, and choose OK.
Add Server
List of servers matching the search
This option is displayed if you entered
letters to search. Scroll to select the server
you want from the list.
:
Advertisement
Table of Contents
