Canon Z5000 Configuration Manual page 148

6
6-6 Administering the ColorPASS
After this Setup screen:
Navigating NDS tree
(Network Setup> Service
Setup>PServer Setup>
NDS Setup)
Bindery Setup
(Network Setup> Service
Setup>PServer Setup>
Bindery Setup)
Select File Server From List
(Network Setup> Service
Setup>PServer Setup>
Bindery Setup)
Enter First Letters
of Server Name
(Network Setup> Service
Setup>PServer Setup>
Bindery Setup)
View Server List,
Edit Connection
(Network Setup> Service
Setup>PServer Setup>
Bindery Setup)
This message:
___ is empty.
If you also plan to use NDS,
set up NDS before Bindery.
Error. Cannot open bindery
connection to NDS server.
No NetWare file
server found.
File server name not found.
Try again?
No file server is selected.
Means:
The chosen container contains no sub-containers or objects
relevant to the current mode of navigation.
No NDS settings are present. You are reminded to perform
NDS Setup before Bindery Setup in case your network
includes both NDS and bindery servers.
Select this server through NDS setup or disable NDS and
select it through bindery.
No file server was found when ColorPASS queried the
network to create a list of supported servers or a list of all
servers.
Check cable connections and make sure the NetWare
server is turned on.
No file server with those letters was found when
ColorPASS queried the network. Check the name of the
NetWare file server, check cable connections, and make
sure the NetWare server is turned on.
No file server has been added in Bindery Setup.