Table of Contents
Advertisement
3
3-17 Network Setup options
Network Setup
Protocol Setup
TCP/IP Setup
Confirm the subnet mask setting with your network administrator before
N
:
OTE
proceeding. In some cases the required setting may be different from those listed.
Gateway Address
[127.0.0.1]
This option appears only if you answered No to Get Gateway Address Automatically,
or if you selected RARP as the protocol.
Use this option to set the gateway address for printing with TCP/IP. If your network
uses a gateway, you must change the default to a correct gateway address for your
network.
TCP/IP Setup with Token Ring
Enable TCP/IP for Token Ring, and enter the IP address and subnet mask. Then, if
your TCP/IP network has a gateway, and users outside the gateway plan to print to the
ColorPASS using TCP/IP, enter the gateway address.
Token Ring Setup
Enable TCP/IP for Token Ring
Yes/No [No]
Select Yes if you have a TCP/IP network connected to the ColorPASS over Token
Ring.
If you use Token Ring, enabling TCP/IP for Token Ring is required for enabling the
Fiery WebTools.
If you are using TCP/IP for printing from Windows computers, enabling
N
:
OTE
TCP/IP here also lets you use the Fiery utilities from Windows computers using
TCP/IP protocols.
Advertisement
Table of Contents
