Cabling an FXC E1/T1 transmission unit
•
8.4.4
FXC RRI transmission unit
FXC RRI
Figure 23.
Cabling the FXC RRI transmission unit
•
62 (72)
© Nokia Corporation
Nokia Proprietary and Confidential
All manuals and user guides at all-guides.com
Connect the connectors of the TX/RX signal lines to the 100/120 Ω TX/RX
connectors on the FXC E1/T1 front panel (see Figure 22). Tighten the
connector nut properly.
RX/TX
(Flexbus)
radio 2
RX/TX
(Flexbus)
radio 1
Cabling of the FXC RRI transmission unit
Connect the RX/TX (Flexbus) cable from the radio outdoor unit to the
TNC connector(s) on the FXC RRI transmission unit (see Figure 23).
Installation
DN991456
Issue 3 en