Advertisement
Quick Links
GeoLink
Multi Pro
Model No. 41623
Contact Toro NSN at 1-844-GeoLink (1-844-436-5465) or NSNTech@toro.com for customer service.
Note: When you turn on the display for the first time, it is in standard mode. Ensure the machine is stopped while changing
the display and configuration.
Using the Touch Screen
Sprayer information is added to the screen when you touch and enable the individual icons.
•
Select any icon on the screen to display what is shown on the screen.
•
Press on an icon to change it, and further options will display.
•
Select the options as required and confirm the new display
1
2
3
4
5
6
1. System-information icon
2. Guidance icon
3. Job-information icon
4. Sprayer-controller icon
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Precision Spray System
®
5800 Turf Sprayer
Easy-mode screen
5. Inventory-manager icon
6. Setup icon
7. Sprayer dashboard
8. Master-switch icon
Register at www.Toro.com.
(Figure
1).
g032674
Figure 1
13
16 15
14
7
Figure 2
9. Job-menu icon
10. Field-menu icon
11. Job-assistant icon
12. Zoom-function icon
Original Instructions (EN)
Form No. 3397-442 Rev B
Quick Start Guide
12
11
10
9
8
g031287
13. Screen-view icon
14. Center-map view
15. Boundary-selection icon
16. Boom-display icon
All Rights Reserved *3397-442* B
Printed in the USA
Advertisement
Related Manuals for Toro GeoLink 41623
Summary of Contents for Toro GeoLink 41623
- Page 1 Model No. 41623 Quick Start Guide Contact Toro NSN at 1-844-GeoLink (1-844-436-5465) or NSNTech@toro.com for customer service. Note: When you turn on the display for the first time, it is in standard mode. Ensure the machine is stopped while changing the display and configuration.
- Page 2 Entering a Product and Tank Volume 1. Select the sprayer-controller icon. 2. Expand the sprayer-controller panel. 3. Select the product title, finish the wizard for rate, and confirm (Figure g031480 Figure 4 1. Field-menu icon 3. Field name 2. New-field icon Creating New Field Boundaries in Standard Mode Note: Ensure that the display is in standard mode to create...
- Page 3 8. When finished spraying border, select the create boundary from coverage icon. 9. To only spray within the border, select the auto-section control icon and change the boundary limit to field boundaries. Naming and Categorizing a Field Boundary 1. After creating a boundary, hold your finger on the boundary line.
- Page 4 g031485 g031494 Figure 9 1. Job-menu icon 3. Select the job region Figure 7 2. Configure-job regions icon 1. Current rate 3. Decrease and increase icons 2. Preset-rate icons 4. Sprayer-controller icon 10. Select the excluded regions that are not to be sprayed (bunkers, trees, hazards, etc.) 6.