How To Remove The Bezel - NEC CHIEF K3F220 Installation Manual

How to Remove the Bezel

Caution:
• Use extreme care when performing the steps to remove the bezel from the monitor.
• Use a desk or table with a flat even surface larger than the size of the monitor screen.
• Place a soft cloth on the surface to protect the glass from scratches and provide padding, and then place the
monitor face down on the soft cloth.
1. Remove the 8 screws holding the bezel in place
Be careful not to apply pressure when removing the
screws so as not to stress the LCD panel
2. Insert a spatula (or similar flat object) between the
back cover and the bezel
Separate the hooks starting from the top-left and
proceed clockwise
3. Remove the bezel and store it
The bezel needs to be reattached when repacking
the monitor to store or move it Do not discard the
bezel in trash or recycling
iutn:

Removing the bezel from the monitor leaves the edges of the glass unprotected; be careful when moving
and installing the monitors. Do not let the edges of the monitors touch surrounding monitors. Pressure against the
unprotected sides could chip or crack the glass.
CHIEF STAND INSTALLATION MANUAL | USER'S GUIDE
Removing the Bezel | 5