Attach The Lower Left And Lower Right Monitors - NEC CHIEF K3F220 Installation Manual

Attach the Lower Left and Lower Right Monitors

Two people will be needed to attach the monitors to the stand
1. Temporarily extend the lower left and right monitors
arms away from the center pole to allow room for
attaching the monitors
Ⓕ
Loosen knob
•
Slide the arm away form the center pole
•
Temporarily tighten knob
•
position while mounting the monitors
2. EX241UN-H (no stand) – Remove the lower 2
screws from the back of the monitor Loosen the
upper 2 screws to have some space between the
screw-head and back casing
EX241UN (with stand) – Have 4 VESA standard
screws available, then set the lower 2 screws with
some space between the screw-head and back
casing
3. With one person holding the monitor from the front
and one person holding the monitor from the back,
carefully hang the monitor on the VESA plate of the
arm
Repeat this for the second monitor
4. Tighten all VESA screws
on the back of the arm
Ⓕ
to hold the arm
3 x 2 mUlti-monitoR installation (K3g320) | 29
Ⓕ
CHIEF STAND INSTALLATION MANUAL | USER'S GUIDE