Attach The Lower Center Monitor - NEC CHIEF K3F220 Installation Manual

Attach the Lower Center Monitor

Two people will be needed to attach the monitors to the stand
1. EX241UN-H (no stand) – Remove the lower 2
screws from the back of the monitor Loosen the
upper 2 screws to have some space between the
screw-head and back casing
EX241UN (with stand) – Have 4 VESA M4 standard
screws available, then set the lower 2 screws with
some space between the screw-head and back
casing
2. With one person holding the monitor from the front
and one person holding the monitor from the back,
carefully hang the monitor on the lower-center VESA
plate
3 x 2 mUlti-monitoR installation (K3g320) | 24
CHIEF STAND INSTALLATION MANUAL | USER'S GUIDE