Installing The Upper Left And Upper Right Monitors - NEC CHIEF K3F220 Installation Manual

Installing the Upper Left and Upper Right Monitors

Follow the instructions in "Set the Vertical Arm Position" on page 9 for the upper arms
y
Make sure to set the upper arms set to a preliminary height with enough room to attach the monitors
iutn:

For narrower inactive borders between the upper and lower monitors, install the upper monitors rotated by 180
degrees.
Follow the instructions for steps 1 and 2 in "Attach the Monitors" on page 10 for placing the upper left and right
y
monitors
After the monitors are attached, the upper monitors can be lowered into place following the instructions below
1. Loosen the 2 hex screws
arm height adjustment
One person should hold the monitor to prevent it from
moving while loosening the hex screws
Ⓐ Ⓑ
/ , for the upper left
2 x 2 mUlti-monitoR installation (K3F220/K3g220) | 13
Ⓐ
Ⓑ
CHIEF STAND INSTALLATION MANUAL | USER'S GUIDE