Table of Contents
Advertisement
Adjust Tilt / Swivel / Pivot
Facing the Monitors Towards Center
Three people are needed for adjusting the horizontal position of the monitors One person to hold the spacer between
monitors, one to hold the center-side of the arm to keep the arm steady, and one to make the adjustments
1. Place a spacer between the monitors before moving
them
2. Loosen the knob on the back of the arm for the
monitor
3. Slide the monitor away from the center
4. Loosen the knob for the VESA plate
5. Loosen the hex screw for adjusting the arm angle
6. Adjust the arm swivel to the preferred angle and
temporarily fix the monitor without leaning.
7. Repeat steps 1-6 for each of the left and right
monitors that need to be faced towards the center
3 x 2 mUlti-monitoR installation (K3g320) | 33
CHIEF STAND INSTALLATION MANUAL | USER'S GUIDE
Advertisement
Table of Contents
