Table of Contents
Advertisement
Attach the Upper Center Monitor
Three people will be needed to attach the monitors to the stand
1. EX241UN-H (no stand) – Remove the lower 2
screws from the back of the monitor Loosen the
upper 2 screws to have some space between the
screw-head and back casing
EX241UN (with stand) – Have 4 VESA M4 standard
screws available, then set the lower 2 screws with
some space between the screw-head and back
casing
2. Set a spacer (included in EX241UN-H) on the top of
the lower-center monitor
3. With one person holding the monitor from the front,
one person holding the monitor from the back, and
one person holding the spacer, carefully hang the
monitor on the upper-center VESA plate
3 x 2 mUlti-monitoR installation (K3g320) | 25
CHIEF STAND INSTALLATION MANUAL | USER'S GUIDE
Advertisement
Table of Contents
