Huawei NetCol8000-A Series Quick Manual page 14

7.6
(Optional) Connecting the Low-Temperature Component Cables
Low-temperature component
power cable from outdoor unit
to indoor unit
Low-temperature component
power cable to outdoor unit
The figure shows the cable
routing of NetCol8000-A045.
Also connect L/N to another
outdoor unit if NetCol8000-A090
is configured.
(1) Low-temperature component
(Optional) Connecting the Water
7.7
Sensor
7.8
Water sensor cable
14
(Optional) Connecting the T/H
Sensors Outside Cabinets
1. Connect the T/H sensor cables.
The T/H sensors in the aisles should be
installed on the door frame of IT cabinets,
and1.5 m (33U) away from the ground.
After the sensor is secured, set the sensor
address according to the following table.
T/H
Sensors
Outside
Cabinets