Toro 30604 Operator's Manual page 18

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine such as the operating status, various diagnostics
and other information about the machine
is a splash screen and main information screen of the
InfoCenter. You can switch between the splash screen and
main information screen, at any time, by pressing any of
the InfoCenter buttons and then selecting the appropriate
directional arrow.
1
4
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can use it to
back out of any menu you are currently using.
•
Middle Button—use this button to scroll down menus.
•
Right Button—use this button to open a menu where a
right arrow indicates additional content.
•
Beeper—activated when lowering the decks or for
advisories and faults.
Note: The purpose of each button may change depending
on what is required at the time. Each button will be labeled
with an icon displaying its current function.
(Figure 7) There
g020650
2
3
Figure 7
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
18
Indicates when scheduled service
should be performed
Engine rpm/status—indicates the
engine rpm
Hour meter
Info icon
Sets the maximum traction speed
Fast
Slow
Fan Reversal—indicates when the
fan is reversed
Fuel level
Stationary regeneration required
Air intake heater is active
Raise left deck
Raise center deck
Raise right deck
Operator must sit in seat
Parking Brake Indicator—indicates
when the parking brake is On
Identifies the range as High
Neutral
Identifies the range as Low
Coolant Temperature-indicates the
engine coolant temperature in either
°C or °F
Temperature (hot)
Traction or Traction Pedal