Product Overview; Operation; Filling The Fuel Tank - Toro Power Clear 621QZE Operator's Manual

4
Adjusting the Control Cable
No Parts Required
Procedure
Refer to Adjusting the Control Cable in Maintenance.

Product Overview

Figure 10
1. Chute deflector trigger
2. Discharge chute
3. Fuel tank cap
4. Control bar
5. Quick Shoot™ control
6. Recoil start handle
7. Primer
8. Electric-start button
(model 38459 only)
9. Ignition key
10. Choke lever
11. Oil drain plug
12. Oil fill cap
13. Chute deflector

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
DANGER
Gasoline is extremely flammable and explosive. A
fire or explosion from gasoline can burn you and
others.
• To prevent a static charge from igniting the
gasoline, place the container and/or machine
on the ground before filling, not in a vehicle or
on an object.
• Fill the tank outdoors when the engine is cold.
Wipe up spills.
• Do not handle gasoline when smoking or around
an open flame or sparks.
• Store gasoline in an approved fuel container, out
of the reach of children.
• Do not tip the machine backward with fuel in
the fuel tank; otherwise, fuel may leak out of
the machine.

Filling the Fuel Tank

Fill the fuel tank with fresh unleaded gasoline having an
octane rating at or near 87 from a major name-brand
service station (Figure 11).
1. 1/4 inch (6 mm)
Important: Do not add oil to the gasoline.
Important: Do not use E85 or E20 fuel. Alternative
fuels with high alcohol content can cause hard
7
Figure 11