Sony Airpeak S1 Help Manual page 54

1.
Rotate the gimbal tilt frame (
2.
Loosen the levers (
Adjust so that the left and right adjusters are at the same level.
3.
After adjusting the balance, firmly tighten the levers (
4.
Rotate the tilt frame (
If properly adjusted, the tilt frame (
Adjust the balance of the roll axis.
2
1.
Loosen the lever (
2.
After adjusting the balance, firmly tighten the lever (
3.
Rotate the roll frame (
If properly adjusted, the roll frame (
Adjust the balance of the pan axis.
3
1.
Loosen the lever (
2.
After adjusting the balance, firmly tighten the lever (
3.
With the gimbal stationary, tilt the aircraft forward, backward, left, and right to check if the balance is adjusted
properly.
If properly adjusted, the pan frame (
) to aim the camera lens upward.
) on both sides and slide the tilt frame (
) by about ±45° to check if the balance is adjusted properly.
) will stay still.
) and slide the roll frame (
) by about ±45° to check if the balance is adjusted properly.
) will stay still.
) and slide the pan frame (
) will stay still.
) back and forth to adjust the balance.
) on both sides.
) left and right to adjust the balance.
).
) back and forth to adjust the balance.
).
54