Sony Airpeak S1 Help Manual page 51

1.
Loosen the locking screws (
2.
Extend the tilt top bar (
3.
Place the camera in the gimbal from the front. Slide the camera plate attached to the camera into the groove on
the bottom part of the frame.
Secure the camera in the gimbal.
4
1.
Lower the tilt top bar (
2.
Tighten the top camera screw (
3.
Tighten the lever (
Related Topic
Configuring settings on the camera
Connecting cables between the camera and gimbal
) on both sides of the gimbal frame.
) to make it higher.
), and then tighten the locking screws (
) on the hot shoe adapter screw.
) on the bottom of the frame to secure the camera.
5-027-737-11(1) Copyright 2021 Sony Group Corporation
) on both sides.
51