Help Guide
Airpeak S1
ARS-S1
Attaching the damping plate to the aircraft
The damping plate (with the quick-release pre-installed), hex wrench, and hex screws are included in the gimbal set
(sold separately).
Attach the damping plate to the aircraft.
1
Perform the operations described in
1.
2.
Orient the damping plate so that the quick-release arrow (
the front of the aircraft.
3.
While maintaining the same orientation, place the damping plate on the attachment points of the aircraft.
Use the hex wrench (H2.5 mm) and hex screws included in the gimbal set (sold separately) to attach the
4.
damping plate at two positions on each leg (eight in total).
Insert the plugs at the other ends of the cables connected to the aircraft in the corresponding quick-release
2
ports.
Control cable (aircraft — gimbal)
Power cable (aircraft — gimbal)
®
USB Type-C
cable (aircraft — gimbal)
Front of aircraft
"Connecting cables to the
) surface faces down and the arrow points toward
39
aircraft."