Sony Airpeak S1 Help Manual page 25

LED color LED indication
Red Lit up
White Blinking
White Lit up
Yellow Blinking
Green Blinking
Green Lit up
Blue Blinking
Purple Blinking
*1 IMU: Inertial Measurement Unit
*2 Lock mode: The camera orientation (shooting direction) will remain the same even if the aircraft turns.
*3
Follow mode: The camera orientation (shooting direction) follows the panning (left/right) movement of the aircraft.
10.
Roll adjustment
11.
AUX port
12.
USB port
Related Topic
Mounting the gimbal on the aircraft
Mounting a camera on the gimbal
Connecting cables between the camera and gimbal
Adjusting the balance of the gimbal
Adjusting the gimbal parameters
Configuring the gimbal settings
Status of the gimbal
An error has occurred in the motor or IMU
Under calibration
Starting the motor or IMU.
The motor or IMU is in a standby state.
(*2)
In the lock mode
(*3)
In the follow mode
The gimbal is starting up, so it cannot accept remote operations.
Being operated remotely
5-027-737-11(1) Copyright 2021 Sony Group Corporation
25
(*1)
.