Sony Airpeak S1 Help Manual page 33

1.
Connect the power cord (
2.
Open the power port cover of the remote controller and connect the AC adapter to the power port (
3.
Firmly insert the plug of the power cord (
The battery level LEDs (
To check the battery level
You can check the battery level by pressing the
Related Topic
If you cannot charge the aircraft battery pack
Loading battery packs in the aircraft
) to the AC adapter for remote controller (
) into the wall outlet.
) flash during charging and go off when the battery is fully charged.
(Power) button on the remote controller once.
5-027-737-11(1) Copyright 2021 Sony Group Corporation
).
33
).