Help Guide
Airpeak S1
ARS-S1
Connecting cables to the aircraft
Remove the top cushioning (
1
securely by the frame arms (
Be careful to keep the propeller attachment points (
Connect the cables to the connection hub on the aircraft.
2
Control cable (aircraft — gimbal)
Power cable (aircraft — gimbal)
®
USB Type-C
cable (aircraft — gimbal)
Front of aircraft
Connect the control cable (aircraft — gimbal) (
Insert fully until the plug locks into place.
Rear of aircraft
) from the outer box and place it on a flat surface. Holding the aircraft
), place it upside down on the cushioning.
) of each motor off the surface.
) to the control port (
37
).