Recording - Mitsubishi Electric MELSEC iQ-R Series Introduction Manual

3.5

Recording

Operate the program described in "Page 17 Creating a Program" to perform recording, and read the record data from the
recorder module.
Operating procedure
1.
Switch the CPU module to the RUN state. Check that the RUN LED and OPR LED of the recorder module turn on.
The recording function automatically starts when the CPU module is switched to the RUN state.
2.
Open the program and intelligent function module monitor in GX Works3.
Right-click 0000:RD81RC96  [Register to Intelligent Function Module Monitor]
3.
Start monitoring (all the windows).
4.
Check if the recording function operates normally on the intelligent function module monitor.
5.
Turn on the switch (Cause 2) on the GOT.
3 RECORDING FUNCTION
21
3.5 Recording