Writing - Mitsubishi Electric MELSEC iQ-R Series Introduction Manual

3.4

Writing

Write the parameters, program, and recording setting to the CPU module, and write the project data to the GOT.
Then, reset the CPU module and GOT, or turn off and on the power of them.
CPU module
Operating procedure
1.
Start GX Works3 and connect to the personal computer.
[Online]  [Current Connection Destination]
Configure the settings
as shown on the right.
2.
Write the data to the programmable controller.
[Online]  [Write to PLC] from the menu
3 RECORDING FUNCTION
3.4 Writing
3
18