Wall-Mounting The Chassis; Removing Mounting Ears; Marking And Drilling Holes - Huawei OptiX RTN 950A Quick Installation Manual

c
Installing PGND Cables
M4
1.4±0.14 N· M
4

Wall-Mounting the Chassis

a

Removing Mounting Ears

d
To the ground point
on the column of the
cabinet or the indoor
ground bar
b
Place the chassis on the wall and then mark the positions
of the holes for installing mounting ears. Drill the holes in
the marked positions and install the bolts. After the
installation, ensure a minimum of 50 mm space on the
upper and lower sides of the IDU for ventilation.
14
Installing the Chassis in the
Cabinet
NOTE
Install the cable tray if provided.

Marking and Drilling Holes (1)

cable tray
M6
2.0±0.2 N· M
≥
300 mm
8