Introduction to the RTN 950A Equipment
1
Ports
Input power port
USB port
NM/COM port
NOTE
Based on different board configurations, the positions of the actual IDU ports may be different from the
positions shown in the figure.
2
Installation Holes on Both Sides of the Chassis
NOTE
Before installing the chassis in the ETSI cabinet, adjust the holes for installing mounting ears based on the
type of the cabinet.
10
11
NE concatenation port
External clock port/External
time port 1/Bypass E1 port
Ethernet service port
12
STM-1 service port
E1 port
ESD port
Holes for installation in the T63/T66/N66T cabinet
Holes for installation in the N63E/19-inch cabinet
10
IF port
XPIC input/output ports
12
ODU power switch