Table of Contents
Advertisement
Installing the solid-state drive
Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
To install the solid-state drive, do the following:
1. Install the solid-state drive into the storage converter shipped with the solid-state drive. Then install the
four screws to secure the solid-state drive to the storage converter.
Figure 51. Installing the solid-state drive into the storage converter
2. Remove the 3.5-inch storage drive bracket out of the chassis.
3. To install the storage converter into the 3.5-inch storage drive bracket, flex the bracket and align pin
pin
2
, pin
3
, and pin
Figure 52. Installing the storage converter together with the solid-state drive into the storage drive bracket
84
ThinkStation P410 User Guide
4
on the bracket with the corresponding holes in the storage converter.
1
,
Advertisement
Table of Contents
